Humminbird 700 series Operating Manual Download

Page: 99 / 200

SD Memory Card Slots

Export Navigation Data

You can export all saved Tracks, Waypoints, and Routes from your Fishing
System to an optional-purchase SD memory card.

To Export All Navigation Data:

1. Make sure that an optional-purchase SD memory card is installed in the

slot.

2. Press the MENU key twice to access the Main Menu, then press the

RIGHT Cursor key until the Navigation tab is selected.

3. Highlight Export All Nav Data and press the RIGHT Cursor key. The

Confirm dialog box will appear. To confirm export, press the RIGHT
Cursor key once more. To cancel export, press the LEFT Cursor key.

NOTE:

If an SD memory card is not installed, an error message will be displayed. Insert

the SD memory card and try again.

NOTE:

The SD memory cards and USB Memory Card Reader require separate

purchases. The USB Memory Card Reader accessory can be used in conjunction with
your personal computer to view and organize your exported navigation data. To
purchase this accessory, visit our Web site at

humminbird.com

or contact our

Customer Resource Center at

1-800-633-1468

Summary of Contents for 700 series









































































































































































































Search results

Summary of Contents for 700 series

Reviews:

Related manuals for 700 series

Brands by name

Popular brands

Humminbird 700 series, Operating Manual

Search results

Summary of Contents for 700 series

Reviews:

Related manuals for 700 series

Brands by name

Popular brands