Humminbird 386ci Combo Page 111 Operation Manual Download

Page: 111 / 179

Remove Target

(only if a Target is active)

Settings: Press the RIGHT Cursor key to activate.

Remove Target

removes the waypoint target from the display. This menu option

will only appear when a target has already been applied to a waypoint.

NOTE:

See

Introduction to Navigation: Add a Waypoint Target or Trolling

Grid

for more information.

Remove Grid

(only if a Grid is active)

Settings: Press the RIGHT Cursor key to activate.

Remove Grid

removes the waypoint grid from the display. This menu option will

only appear when a grid has already been applied to a waypoint.

NOTE:

See

Introduction to Navigation: Add a Waypoint Target or Trolling

Grid

for more information.

Sonar Window

(Combo View only)

Settings: Wide, Medium, Narrow; Default = Medium

Sonar Window

sets the size of the Sonar Window in the Combo View. Sonar

Window can only be accessed from the Combo View.

Waypoint [Name]

(Most recently-created waypoint)

Settings: Edit, Delete, Go To, Target, Grid

Waypoint [Name]

allows you to view the waypoints submenu for the most

recently created waypoint. You must have pressed the MARK key at least once
since you last powered up the Fishfinder for this menu option to appear.

NOTE:

See

Introduction to Navigation

and the Humminbird® Waypoint

Management Guide for more information.

Navigation X-Press™ Menu

Summary of Contents for 386ci Combo




















































































































































































Search results

Summary of Contents for 386ci Combo

Reviews:

Related manuals for 386ci Combo

Brands by name

Popular brands

Humminbird 386ci Combo, Operation Manual

Search results

Summary of Contents for 386ci Combo

Reviews:

Related manuals for 386ci Combo

Brands by name

Popular brands