Humidex
11
Attaching the Flex and Outside Vent
From the outside, pull the flex pipe
through the 6 ¼”
hole. Attach the vent to the 6”
flex with the ½ in
screws provided.
Insert four 2 inch screws to secure the vent to the
outside wall. Make sure the vent is not twisted by
inserting the screws too tight and that the flaps are
working properly.
NOTE:
If high winds are often present in the location of the vent, they may cause a
wind noise inside the house. If this is the case, an
anti-gust hood
(AGH-990) is
available from your Humidex dealer.
Now that the system has been mounted the HCS can be plugged into any 115V outlet.
Note:
A grounded extension cord with a maximum length of 10 feet may be used if
necessary
