Humbaur 7000 Series Operating Instruction Download Page 77

Page: 77 / 100

Central partition wall

Operating the body

MACHT’S MÖGLICH

Fig. 122

Removing the central partition wall

Front lock



Lift the centre post (front) out of its locking mechanism on
the floor (front).



Lift the central partition wall up and remove it.

Deposit the central partition wall secured against falling
over.

Fig. 123

Deinstalled central partition wall

Inserting the central partition wall

Fig. 124

Inserting the central partition wall

Front lock

Rear lock



Position the central partition wall with the post above the
locking mechanism front / rear.



Insert the central partition wall.



Swivel the central partition wall towards the middle.

Fig. 125

Central partition wall secured

Locking lever, secured



Turn the locking lever (Fig. 125 /1) towards the central
partition wall.



Secure the central partition wall with the breast and
breech bars - see page 74.

A - 122

A - 123

A - 124

A -

125

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands