Humbaur 7000 Series Operating Instruction Download

Page: 46 / 100

Saddle compartment

Operating the body

MACHT’S MÖGLICH

Saddle compartment accessories

Fig. 8

Example Xanthos AERO internal view.

Mirror, glued on

Revolving door

Rotary knob, 3-point locking

Drainage hole (in the floor)

Fastening bracket

Gas strut

The saddle compartment is used as a storage area for
horse accessories:

– Saddle
– Bridle
– Broom and shovel

Additional accessories can be transported in the saddle
compartment. The saddle compartment has holes in the
floor for water drainage.

DANGER

Driving with an unlocked saddle compartment door.

An unlocked saddle compartment door may autonomously
fold open while driving - accident risk!
The goods might fall out - impact risk!



Make sure that the saddle compartment door is closed
and secured before driving off.

Fig. 9

Example Notos ALU, internal view

Lights

Saddle holder (fixed / optionally equipped for swivelling or
folding down)

Snaffle holder

Storage net

Hoof scraper

Universal hook

Shovel

Broom

Fig. 10

Example Maximus, internal view

Operating the saddle compartment door

Fig. 11

Saddle compartment door closed / open

The saddle compartment door of some versions is held
open by a gas strut or can be locked by a door holder.
The door is not 100% water-tight.

Opening



Unlock the saddle compartment door - see page 44.



Push open the saddle compartment door.



Secure the saddle compartment door using the door
holder - see page 45.

Closing



Detach / unlatch the saddle compartment door from the
door holder - see page 45.



Close the saddle compartment door.



Lock the saddle compartment door - see page 44.

A - 008

A - 009

A - 010

A - 011

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands