Humbaur 3000 Series, Operating Instructions Manual, Page: 73 / 106

Flat cover (option)
71
MACHT’S MÖGLICH
Load securing / Operating the body
5
Flat cover with aluminium extension
Fig. 62 Flat cover
1 Tension rope
2 Flat cover
3 Eyelet
4 Hook
 Pull the hooks (Fig. 62 /4) out of the eyelets
(Fig. 62 /3) or holes (Fig. 63 /5).
 Open and remove the flat cover (Fig. 62 /2).

Put the flat cover somewhere where it is safe from
damage.
Fig. 63 Flat cover secured (driving position)
1 Flat cover
2 Tension rope
3 Hook
4 Aluminium extension
5 Holes
6 Eyelet
 Stretch the flat cover (Fig. 63 /1) over the aluminium
extension (Fig. 63 /4).
 Secure the flat cover on all sides by inserting the hooks
(Fig. 63 /3) in the eyelets (Fig. 63 /6) or holes (Fig. 63 /
5).
The flat cover has been closed and secured.
Flat cover with steel mesh extension
Fig. 64 Flat cover
1 Flat cover
2 Steel mesh extension
The handling of the flat cover (Fig. 64 /1) with the steel
mesh extension (Fig. 64 /2) is the same as with the base
drop side / aluminium extension.
The hooks are hooked into the steel mesh walls on all sides.
A - 055
3
4
2 1
A - 056
1
2
3
5
6
4
A - 057
1
2