Humbaur 3000 Series, Operating Instructions Manual, Page: 47 / 106

4
Toolbox (option)
45
MACHT’S MÖGLICH
Operating the chassis
Toolbox
A lockable toolbox is available as an option.
The toolbox is located on the front of the chassis on the right
in the direction of travel.
The toolbox is used for stowing away lashing straps, tools,
cleaning equipment, etc.
The toolbox is not waterproof.
WARNING
Unlocked toolbox
Objects could fall out while driving.
The lid could be torn off - risk of accidents!
 Check that the toolbox is closed and secured before
driving off.
 Lock the toolbox to prevent unauthorised access.
Opening the toolbox
Fig. 41 Toolbox locked
1 Cover
2 Lock with lock cylinder
3 Fastening bracket
4 Lid
Please note the specified surface loading
(see manufacturer's specification on the inside of
the lid, approx. 30 kg).
 Fold down the covers (Fig. 41 /1) of the lock cylinders
(Fig. 41 /2).
 If required, use a key to open the locks (Fig. 41 /2).

Open the locks by turning.
 Fold down the lid (Fig. 41 /4).
 Watch out for falling objects when opening the lid.
Closing the toolbox
Fig. 42 Toolbox open
1 Key
2 Toolbox
3 Lid
 Fold the lid (Fig. 42 /3) upwards.
 Close the locks (Fig. 41 /1) by turning.

If required, use the key (Fig. 42 /1) to lock the toolbox.
The lid is locked.

Close the cover (Fig. 41 /1).
3 4
F - 043
1 2
F - 044
1
2
3