3.4 Recharging the Battery
To recharge the SmartView Pocket:
• Connect the power supply to one end of
the USB cable.
• Connect the other end of the USB
connector to the SmartView Pocket's USB
port.
• Plug the power supply to an electrical
outlet.
The SmartView Pocket needs to be plugged
in for approximately 3 hours to reach full
charge. The charger light will turn off
when fully charged.
Once fully charged, the SmartView Pocket
can be used for a period of about 3 hours.
3.5 Connecting to a TV screen
If you wish to view the magnified image on
a larger screen, you can connect the
SmartView Pocket to a television. To do so,
plug the RCA video cable's single connector
to the SmartView Pocket's A/V port
located on the left edge. Plug the yellow
(video) connector to video input port on
your television. The remaining sound
connectors are not used.
