English 55
SOS mode – Programming
When you enable the SOS mode setting, you should program the following
settings:
1. Store an SOS recorded message
2. Store the SOS phone numbers
3. Set the number of cycles
4. Set the length of pause after an unsuccessful cycle
5. Set the duration of the active connection
6. Assign SOS hand-operated transmitters
7. Enable SOS mode
Storing an SOS recorded message
1. Press the button and then the button.
2. Enter the four-digit device PIN "
XXXX
" (the telephone's default PIN
code is "
0000
").
3. If you enter the code "
354
", "Start" appears on the display.
4. Keep the button pressed while you record the SOS recorded
message (max. 20 seconds).
5. Release the button again to stop recording.
Re-enter a code or press the button to exit the Settings menu.
Note:
When an SOS call is received, the SOS recorded message is automatically
played. On the one hand, the SOS recorded message should be kept short
(max. 20 seconds), although it should contain all the information that the
recipient requires in order to take immediate steps to provide aid quickly.
P
P
*
