
English 7
Congratulations on purchasing the
Acoustic Module MA-1.
You have selected a modern and
reliable system.
With the Acoustic Module MA-1 you
can extend every unit that has a
connector socket (3.5 mm jack) for
the vibrating pillow with a very loud
acoustic tone.
Standard components
Please check if all listed items are
included:
-
Acoustic Module MA-1
- Connecting
cable
- 9 V-power supply unit
- Warranty
card
Installation
Attach the connecting cable to one
of the two connector sockets for the
signal source at the back of the
Acoustic Module MA-1.
Plug the
other end of the cable into a unit
with a connector socket for a vibra-
ting pillow, e.g. digital clock DS-1,
vibrating clocks VC-1 / VC-10, time
flash
/
lisa
time
flash, lisa
receiver
(table flash lamp, radio flash lamp,
portable radio receiver).
Plug the 9 V-power supply unit in the
respective socket at the back of the
Acoustic Module MA-1.
Note:
A vibrating pillow or another module
(e.g. Flash Module) can be plugged
into the empty connector socket at
the back of the
Acoustic Module
MA-1.
Signalling
Upcoming signals (e.g. wake-up
alarm,
lisa
alarm) are signalled by a
very loud acoustic tone.
Special features
Volume: continuously adjustable
(max. 100 dB)
Tone pitch: continuously adjustable
(100-2000 Hz)
Power failure backup:
with a 9 V battery
Battery operation (not included)
The
acoustic module MA-1
can also
be operated on just a 9V battery
BA-MA-1_0605 26.06.2005 17:54 Uhr Seite 7