Humanscale M2.1 Installation Instructions Download Page 2

Page: 2 / 2

STEP 1:

STEP 4:

STEP 5:

STEP 2:

STEP 3:

STEP 6:

Remove the plastic front cover.

Remove the two side screws and

top screw from the mount and

Separate the mounting plate

from the rest of the mount.

Align the mount with the

mounting plate on the wall.

Reinstall the two side screws and

top screw into the mount and tighten.

Reinstall the plastic cover.

Attach the mounting plate to

a wall stud or other structural

support using the screws provided.

Mounting to drywall alone

is not recommended.

Use level to ensure that

mounting plate is perfectly

level.

Summary of Contents for M2.1

Page 1: ...e 180º Arm can rotate 90º STEP 7 Position the stop ring to limit the arm s range of motion if desired The marked angle will be in the center of the range of motion STEP 8 Insert monitor arm into the mount until release button locks in place To remove arm press release button and pull the arm up near the joint HSM21SWMI0418 ...

Page 2: ...e rest of the mount Align the mount with the mounting plate on the wall Reinstall the two side screws and top screw into the mount and tighten Reinstall the plastic cover Attach the mounting plate to a wall stud or other structural support using the screws provided Mounting to drywall alone is not recommended Use level to ensure that mounting plate is perfectly level ...