USB-206 v1.0
5
2.2. Device Power
Device power can be controlled by sending a command from
the controller port. You can set it ON when the main power
is ON by setting switch. When the power is ON, the LED
will be lighted green.
When detecting the over trip current, the power is shut down. At that time,
connection to the host PC is canceled and the host status LED is turned to Red. To
restore the device power, please use command ‘H’.
2.3. Host Changeover Switch
This is a 3 position switch for switching host manually.
Center position is a setting for setting no host.
Operation of this switch does not affect controlling the device power.
2.4. Host Status LED
A host status LED lights up green when the host take a connection to the device.
When the host holds a device, the light is turned to orange.
