6
USB-03G1 v1.1
3.
Connection
Please use an included USB cable and connect the host side connector to the host,
such as a personal computer, and connect a USB peripheral device to the target
side connector.
4.
Power Supply
USB-03G1 is powered through a USB port (Bus-powered) or an AC adapter
(Self-powered). An AC adapter has priority when both supplies are applied. Target
side, USB TG, is linked with host side, USB HST.
5.
SG/FG Separation Switch
You can separate between each SG, signal ground, and FG, frame ground, of USB
host and USB target by the dip-switch.
Position
GND - FG
OFF
Open
ON
Connection
* The function of the switch of host and target side is the same.
6.
FG Terminal
It is possible to connect a ground wire to this terminal when needed.
