8
LNX-204 (Ver.1.1)
5.
External Contact Connector
D-sub 9 pin connector is mounted as external contact. When SEL1-4 is shorted with
GND, the LAN port is switched.
e.g. Short SEL3 (pin no. 3) with GND (pin no.5): Common LAN port and LAN3 port
is connected.
* #4-40 UNC screws are mounted by factory setting. You can change them to attached
M2.6 screws.
* COM (pin No.9) is an option for DC 5V to 24V power input.
If you need to change LAN port directly from open collector or transistor, please
contact us.
Pin No
Name Direction
Remarks
1
SEL 1
IN
Select LAN1
2
SEL 2
IN
Select LAN2
3
SEL 3
IN
Select LAN3
4
SEL 4
IN
Select LAN4
5
GND
-
GND
6
NC
-
-
7
NC
-
-
8
NC
-
-
9
(COM)
-
Power Input
(option)
CASE
FG
-
Connect with
FG Terminal
D-Sub 9pin Male
To prevent the damage, for SEL 1 to 4 please use no-voltage contact (dry
contact) like relay contact or switches.
Notice
