© 2017 HumanCentric Ventures LLC
www.humancentric.com
2. ATTACH MOUNTING ARM TO WALL
1. REMOVE MOUNTING PLATE FROM MOUNTING ARM
Use the included wrench to loosen the top two nuts and
completely remove the bottom nut on the back of the
mounting plate.
Pull the bottom of the plate away from the mounting
arm and lift the plate up to remove it from the arm.
Read the entire instruction manual, including the warnings at the end of the manual, before you start installation and
assembly. If you have any questions regarding any of the instructions or warnings, please contact the HumanCentric
support team for assistance at [email protected]
CAUTION
Use with products heavier than the maximum weights indicated may result in damage to the mounted devices or
personal injury.
IMPORTANT
Ensure that you have received all parts according to the parts list prior to installation. If any parts are missing or
damaged, please contact the HumanCentric support team for replacements at [email protected]
2A.Determine VESA Mounting Pattern
Place the mounting plate on the back of your TV. If
the holes lines up with the holes in the bracket,
proceed to step 2b. If the holes are bigger than the
plate, install the extension arms.
200mm
200mm
200mm
200mm
No extension arms needed
Extension arms needed
2. ATTACH MOUNTING PLATE TO TV
2
