© 2017 HumanCentric Ventures LLC
www.humancentric.com
The last hole in the bottom end of the soundbar bracket will attach to the back of
your soundbar, and the top end of the bracket will attach to the lower pair of
VESA mounting holes on the back of your TV.
There are four options for bracket configuration - determine the appropriate one
for your setup by choosing from the options below:
1. DETERMINE BRACKET CONFIGURATION
Read the entire instruction manual, including the warnings at the end of the manual, before you start installation and
assembly. If you have any questions regarding any of the instructions or warnings, please contact the HumanCentric
support team for assistance at [email protected]
CAUTION
Use with products heavier than the maximum weights indicated may result in damage to the mounted devices or
personal injury.
IMPORTANT
Ensure that you have received all parts according to the parts list prior to installation. If any parts are missing or
damaged, please contact the HumanCentric support team for replacements at [email protected]
Lay your TV face-down on a soft, flat surface. Position the soundbar face-down below your TV.
(If you have already mounted your TV, remove the TV from the mount
and remove the mounting bracket from the back of the TV.)
Bottom end
No extension
Straight extension
Extension - angled out
Extension - angled in
2
