humantouch.com
6
7
ENGLISH
USE ONE-TOUCH CONTROL TO
GO TO ZERO
With the calf massager facing up, press and hold
Go To Zero
to place your body in
a neutral-posture position, relieving pressure from head to toe for maximum comfort.
take
a seat
Using your Human Touch massage chair
is easy. Just take a seat and
recline to the desired position. Your Human Touch
massage chair helps you
feel better, using Zero-Gravity positioning and a wide variety of massage
techniques that you control. It’s the perfect way to relax and refresh.
Do not inhibit the backrest or footrest from power reclining or inclining. Do not attempt to manually recline or incline the
backrest or footrest. Interfering with the power recline will permanently damage the chair.
1. Power on
Plug the power cord into a grounded power source.
Turn the master power switch (on the left-hand side
of the chair) to On.
TO USE THE FOOT-AND-CALF MASSAGER AS A LEGREST
While sitting in the chair, use the controller to deploy the footrest. Pull the footrest rotation release handle (located on
the right-hand side of the footrest) toward you, then rotate the footrest toward the chair until it clicks into position with
the flat side of the footrest facing up. Do not force the rotation of the footrest past the point at which it clicks to lock.
Excess force may damage the mechanism.
For an easier exit, restore the footrest and backrest to their original locations before getting
out of the chair.
Press and hold the
Stop
button to stow the footrest and return the chair to the upright position.
Make sure the area behind/underneath the footrest is clear of any obstructions before retracting the footrest.
Do not stand or sit on the foot and calf massager.
NOTE:
The foot and calf massager must be locked into position to raise the backrest.
Use these buttons to adjust your seating posture
ADJUST THE FOOT-AND-CALF
MASSAGE INTENSITY
While sitting in the chair, turn the calf massager width knob
clockwise to increase massage intensity or counter-clockwise
for a less-intense massage.
