9
ENGLISH
humantouch.com
8
4. Reinstall the clips from Step 1 by sliding onto the
mounting post, securing the massager to the chair (Fig.5).
5. Press the upholstered flap from the foot and calf
massager down onto the chair base, securing the
hook-and-loop fasteners (Fig.6).
Fig.6
Fig.5
Flap
Install the Body Pad
1. On the left-hand side of the chair, locate the heat cable (Fig.7).
2. Connect the heat cable from the chair base to the corresponding
cable on the body pad. You will hear a click when the two ends
are properly connected (Fig.8).
3. Slide the protective rubber casing over the connection to
secure it (Fig.9).
Fig.7
Fig.9
Fig.8
Clip
click!
