THIS MANUAL MAY NOT BE REPRODUCED IN PART OR IN WHOLE
WITHOUT THE WRITTEN PERMISSION OF THE PUBLISHER.
USER MANUAL
BRAKE USAGE/ADJUSTMENT
LOCK THE BRAKE
by pushing down on the
handle (for loop handle, push down on the ball
located at the end of the handle). The handle
will lock into a downward position when
properly engaged.
RELEASE THE BRAKE
by pulling up on the
handle.
BRAKE FOR SPEED CONTROL
by
squeezing on the handle.
IF THE HAND BRAKE IS TOO LOOSE
loosen the
Locking Nut
and turn the
Tension Adjustment Screw
CLOCKWISE
.
NOTE:
If
additional
adjustment is required,
repeat one full turn at a
time. Once adjusted, make
sure the
Locking Nut
is spun
tight against the
Housing
.
This will prevent the
Tension
Adjustment Screw
from
loosening.
FEATHER TOUCH HAND BRAKING SYSTEM
1
2
3
4
5
1. Locking Nut
2. Tension Adjustment Screw
3. Housing
4. Handle
5. Brake Handle Arthritic Ball
When receiving your new walker, the brake
system will be preset from the factory. To
maintain this preset position, be sure that the
Locking Nut
is tight against the
Housing
. This
is the same for the
Tension Adjustment Screw
Locking Nut
located at the rear wheel. (To adjust
see: Brake Usage/Adjustment)
UNDERSTAND YOUR ROLLATOR
Backstrap
Brake Handle
Star Handle
and Bolt
Seat Strap
Crossbar
Basket
Arthritic
Ball
Tension
Adjustment
Screw
Push Handles
Backstrap Clamp
Product name
Article number
Maximum user weight
Date of manufacture,
BATCH number and
address of manufacture.
UPC code
CODE 39 barcode,
Serial number
Seat height
Product width
Indoor / outdoor use
