20
www.humancaregroup.com
Attach the 4-point Spreader Bar Medium and Large to the overhead lift
ENG
A: Power connection
Place the overhead lift (1) on a suitable
surface. Connect the power supply cable (2)
to the T-Splitter (3). If a power traverse is used
connect it to the open end of the T-Splitter (4).
Connect the T-Splitter to the inter rail charging
contact on the overhead lift (5).
B: Attachement of the bar to hook of
overhead lift
Place the Powered 4-point Spreader Bar on a
suitable surface. Feed out enough of the belt
and connect the Spreader Bar to the hook on
the lift belt by threading the hook diagonally
from below, see figure. Connect the power
supply cable to the Spreader Bar. Switch on the
main power on the overhead lift and release
the Powered 4-point Spreader Bar emergency
switch. The product is now ready for use.
