www.humancaregroup.com
9
ENGLISH
Assembly:
The Oxygen bottle holder can be mounted on any
of the four end pillars in the corners of the bed.
1. Start with raising the bed to its highest position
2. Untighten the screws on the Oxygen Bottle
Holder so that the mounting plates is loose.
3. Move the mounting plate and the oxygen bottle
holder into to the slot on one of the end pillars.
4. Slide the Oxygen bottle holder upwards until the
lower mounting plate can be inserted fully in the
slot.
5. Mount the Oxygen bottle holder up to the top of
the slot.
6. Tighten the top screw with an Allen key 6 mm.
7. Tighten the top screw with an Allen key 6 mm.
