www.humancaregroup.com
11
ENGLISH
Assembly:
8. Put the mounting plate (4) inside the sliding track
of the bed head pillar.
9. Place the Support Bracket Bottom (6) paralell to
the Mounting Plate (4), and align the upper hole
with the Mounting Plate.
10. Take one of the Screws M10 (8) and add a
Washer (7). Assemble the upper hole of the
Support Bracket Bottom and the Mounting Plate
with an Allen Key 6 mm. Do not tighten the screw
fully.
11. Slide the Support Bracket Bottom up so that the
lower hole can be paralel to the second Mounting
Plate.
12. Take one of the Screws M10 (8) and add
a Washer (7). Assemble the lower hole of the
Support Bracket Bottom and the second Mounting
Plate with an Allen Key 6 mm.
13. Place the lower part of the Support Bracket
Bottom 10 cm from the lowest part of the sliding
track. Tighten both screws fully at the bottom part
of the sliding track.
10 cm
