humancaregroup.com
3
En
gl
ish
Open the clamp and ensure that the smaller
cassette remains in the Slow Down Brake
and that the smaller wheel in the cassette
rests against the rollator’s rear tire. (picture
4)
The distance between the lower edge of the
Slow Down Brake and the upper part of the
rear fork should be approximately 2 cm.
(picture 5)
Tighten the knob on the side so that the
brake is firmly attached to the frame and
the small wheel rests against the rear tire,
to get the desired resistance on the wheel.
Adjust the hardness with the upper knob.
Lock the upper knob with the wing nut. Test
the rollator with the SloW Down Brake to
ensure that the resistance is as desired.
(picture 6)
Repeat this process on the other side.
4
~
2 cm
5
6
