I N S TA L L A T I O N
18
SuperSaw
en011506a_ss550.FM
Installation
Where to install the grapple saw?
SuperSaw 550 should normally be installed with the saw motor
on the same side as the piston rod of the grapple cylinder, to
achive the best weight balance.
On the A-models of the SuperGrip II grapples, the SuperSaw
550 should be installed on the same side as the longer tips of the
grapple arms, to optimize the performance of the grapple saw
together with the grapple.
The grapple saw should be installed with a Min. distance of 70
mm from the saw chain to the log, with the saw bar fully
retracted.
