Huka Dukki, Insruction Manual

Page: 17 / 24

Figure 11 iadjusting height, depth and angle
4.8.2 Adjusting height, depth and angle
1) Turn the head rest operating handle as far as possible upwards.
2) Disconnect the handle by pulling it to the side and turning the handle downwards
1)
Repeat this action until the head rest can be moved.
2) Decide on the correect position for the head rest.
3) Fix the head rest using the handle.
If the head rest cannot be raised far enough, the whole rest can be raised slightly more by
fixing it further up in the seat.
1) Remove the wrench from the locking pin for the foot rest
2) Loosen the upper bolts in the back of the seat
3) Draw the profiles a maximum of 5 cm. upwards in the seat
4) Tighten the bolts in the back of the seat well
12