19
Angle of handlebars
1) Use a size 6 Allen key to loosen the handlebars bolt, so that you can move the
handlebars.
2) Pull or push the handlebars to the desired angle.
3) Tighten the handlebars bolt again.
Sometimes the handlebars may be stuck very tightly and
can’t be moved even wen you loosen the bolt. If that is the
case, use a plastic or rubber hammer to loosen the bolt. When
you strike it, it will slipp down slightly and the handlebars will
become loose.
Make sure that you tighten the handlebars properly again.
Loose-fitting handlebars may slip while you are cycling.
This can be dangerous.
Make sure that the steering post is inserted at least 6 cm into
the frame. You should not be able to see the safety mark on
the steering post.
