As the “Support TabletPC” checked, please turn off flicks to get a better using experience.
Abnormal phenomena
Suggesstions
5.2 Possible breakdowns related to hand input function
The pen does not work
Cursor movement is abnormal
The side button of the pen
doesn't work
There're great discrepancies
in locations
Try pulling out and inserting the USB wire again or restarting the PC.
When pressing the side button, please make sure that the nib doesn’t touch glass
surface and the distance between the nib and the surface is within 5mm.
Adjust the screen. Please refer to 2.6 for specific instructions.
1. If the driver is damaged or is not properly installed, please uninstall the driver
and reinstall it. Please refer to 1.3.2.
2. Whether the power is exhausted or not? If so, please charge.
3. If the nib has got shorten due to wear and tear, please replace the nib.
4.Try restarting the PC and the monitor.
5.Try pulling out and inserting the USB wire.
5.3 Support Tablet PC
Also called Electronic Ink Function, which is normally used for supporting pressure sensitivity under Office 2007, Journal or
later version. For Sketchbook 6.0, Photoshop CC2014(or later) on Windows8 or later system, checking "Support TabletPC" is
needed to support pressure sensitivity.
As for other drawing software, please read the software instruction carefully to see whether it supports windows TabletPC or not,
and try to disable Support TabletPC if it is needed.
-17-
