http://www.huidu.cn/
10
3. Layer setup
The multi-screen video splicing processor has 4 layers, and each layer can be configured
with parameters ,such as input source, layer switch, position, size, rotation mode, and
layer layout. The layers button is arrayed on the front panel.
The layer must be selected before the operation, and the layer should be in the enabled
status. If the layer is disabled, please enable the layer in the layer settings.
1) Input source
Press the layer indication button on the front panel, then press the input indication button
which array
in ”INPUTS” area on the front panel, for example, set the input of layer B to
DP1.
2) Layer layout
This video processor provides 8 different layer layouts that users can choose based on
their specific needs.
3) Layer setting
You can set various parameters for all layers, including layer on/off, layer flips, horizontal
start, vertical start, horizontal width, and vertical height. When the preset parameters do
not meet the requirements, the parameters of each layer can be adjusted separately.
