1
Respected Customer:
The detailed information provided here in below, which contains the installation, trial run,
operation and maintenance of “EDGE 190L Gasoline Dynamotor and Welding machine”, is
intended for your kind perusal to help you minimize the operational problems so that the
product can work as smoothly as it is expected.
Warning
！
* TO OPERATE AND MAINTAIN BY SPECIALIZED PERSONNEL, REPAIRED
BY THE PROFESSIONAL PERSONNE ONLY.
* ANY OPERATION AND MAINTAINECE BEFORE READING THIS MANUL IS NOT
ALLOWED.
Attention
！
* Please use the SAE10W30 engine oil, replace the oil 10 hours for the
first usage, and then changes the oil every 50 hours.
* Do not connect with general alternating current!
* Please read this manual carefully!
INDEX
1
、
Brief introduction to EDGE190L
Gasoline Welding Generator
2
、
Safety Operation
2.1. Safety Notice
2.2 Operator’s self-protection
2.3 Operator’s notice
2.4. Safe Measures to be taken to assure the
correct Installation and Position
2.5 Safety Check
3
、
Technical Specification
3.1 Environment to Which the Product is
Subject
3.2.Welding Generator’s Principle
3.3
．
Main Technical Data
3.4
．
Standard applied
3.5.
Remark & Sign of Illustration
4. Control Panel
4.1.Control panel, parts name
and function
4.2
．
Control Panel
5
、
Operation Environment
5.1. Outdoor operation
2
2
2
2
4
4
5
5
5
5
6
6
7
7
7
7
8
8
8
6.4
．
Protection grounding
check
6.5
．
Check to make sure no oil
leakage
6.6
．
Check whether the parts are loose
6.7
．
Check whether there are
foreign objects inside or
outside of the machine
6.8
．
Loading Matching
7. Pre-starting Procedure
8. Starting Procedure
9. Stop Procedure
10. Welder, generator operation
11. Simple fault examination
guidance
12. Failure and repair
12.1 Regular check and maintenance
table
12.2. Notices
12.3 The fault and removes
13. Main circuit chart
14. Complete Set Specification
9
9
9
9
9
9
9
9
10
10
10
11
11
11
12
12
13
14
