Figure 56: Local Area Connection Properties Dialog – Windows 2000
5.
If NetBEUI is installed and checked, uncheck it or uninstall it.
6.
Highlight Internet Protocol (TCP/IP). Be careful not to uncheck the checkbox.
7.
Click
Properties
.
The Internet Protocol Properties dialog appears as shown in
on page 69.
Figure 57: Internet Protocol Properties – Windows 2000
8.
On the General tab, select Use the following IP address.
9.
Enter the IP address and Subnet mask.
If you do not know what static IP address or range of addresses is available for use, see
Understanding the router address and computer address
on page 53.
10.
Enter the satellite router IP address in the Default Gateway field.
11.
Enter
66.82.4.8
in the Preferred DNS server field.
12.
Click
OK
to close the dialog box.
13.
Click
OK
again to save the settings and close the Local Area Connection Properties dialog.
14.
Restart the computer.
Configuring a Mac computer to use a static IP address
Perform the following procedures to configure a Mac system for a static IP address.
69
HN9500 Satellite Router User Guide
1037737-0001 Revision E
Appendix A
Computer settings