Configuring a Mac computer to use DHCP
This section explains how to configure your computer to use DHCP if you are using an Apple
Mac computer.
1.
From the Mac interface, select
System Preferences
.
The System Preferences menu appears.
2.
Under Internet & Network, click the Network icon.
The Network screen appears as shown in
on page 62.
Figure 45: Mac Network screen
3.
Ensure that the TCP/IP tab is selected.
4.
Select Using DHCP from the Configure drop-down list as shown in
from the configure drop-down menu
on page 62.
The IP Address field becomes disabled.
Figure 46: Select DHCP from the configure drop-down menu
5.
Click
Apply Now
to close the screen.
HN9500 Satellite Router User Guide
62
1037737-0001 Revision E
Computer settings
Appendix A