Chapter 2 • Antenna parts and required tools
1037750-0001 Revision A
7
Chapter 2
Antenna parts and required tools
This chapter describes the components and parts provided with
the AN8-098P Ka-band antenna kit. It also lists the hardware and
tools needed to properly assemble and install the antenna. This
chapter contains the following sections:
•
Antenna kit components on page 7
•
Small hardware parts list on page 14
•
Tools on page 15
Antenna kit
components
Upon receiving the kit, unpack and inspect the antenna
components and hardware to make sure all parts have been
received in good condition. If any parts appear to have been
damaged in transit, immediately contact the freight carrier. If any
parts appear to be missing or damaged, but not as a result of
handling in transit, contact your dealer or distributor.
The antenna kit is shipped in three containers. Figure 2 identifies
the contents of each container.
CAUTION
Metal components may contain sharp edges. Use care when
un-packing and handling antenna parts.
Note:
To avoid potential damage, leave all components in their
protective packages until required.
Summary of Contents for AN8-098P
