Hughes AN6-098P, Installation Manual

Page: 34 / 98

Chapter 2 • Antenna parts and required tools
18
1037312-0001 Revision B
Additional parts for
J-type radio
The parts listed in Table 3 are included only in the antenna kit for
the J-type radio. The antenna kit for the J-type radio also includes
the part listed in Table 2.
Table 3: Additional small hardware parts included in the antenna kit for the J-type radio assembly
Part Quantity Comments
1-inch inside diameter O-ring 1 These parts are used to attach the:
• Waveguide transition to the radio assembly
• Upper mounting bracket to the transmitter
• Upper and lower mounting brackets to each other
The hardware for each task is specified in Chapter 4
–
Installing a J-type radio assembly.
M4 x 12-mm socket-head cap screws 4
M4 lock washers 4
5
/
16
-18 × 1-inch hex bolts
2
¼
-20 × 1-inch hex bolts
2
¼
-20 × 0.75-inch carriage bolts
4
¼
-inch flat washers
4
¼
-inch lock washers
6
¼
-inch hex nuts
4
Feed horn clamp 1