Hughes 9450 Series, Installation Manual, Page: 17 / 31

•
System power requirements
3004129 Revision A
7
Chapter 2 System power requirements
There is one power connection on the IDU. This must be
connected to a 12 or 24 Vdc power supply.
Power requirements and consumption are as follows:
Table 5. System power requirements
Voltage Input Minimum 10 V
Voltage Input Maximum 32 V
Total Current for ODU, and IDU (Max.) 12 A
Required Fuse 15 A
Fuse
The fuse is a 15 Amp, fast blow, ATO blade fuse. The installed
part is from Littelfuse, part number 0257015. To replace the
fuse, pull fuse out of fuse holder (pliers may be needed to grip
fuse) and press new fuse into fuse holder.
Power cable
The power cable uses a Phoenix contact #1718384 PC5/3
STCL-7, 62 connector, and the pinout is shown in Table 6.
Table 6. Power cable pinout
Color Function
red DC +
white Ignition Sense
black DC -
The optional accessory car adapter power cable, Hughes’ part
number 3500472-0002, includes a car adapter plug with a
20 Amp, 250 V fuse, and the ignition sense wire is connected to
the positive power wire in the plug.