7
TIP 1:
If you choose not to connect a signal processor/effects device to the FX loop, you can connect another
instrument or tape deck. For instance you could connect a guitar, keyboard, drum machine, tape player, etc.
for rehearsals or practice sessions.
Connect the additional device as described above and use the FX-MIX knob as the volume balance control
between your bass and the external signal source.
TIP 2:
Another option is open to you if you do not connect a signal processor: You can use the loop to
activate an additional MASTER volume for the BassBase. To use the FX-Mix control this way:
- Activate the FX LOOP.
- Dial in a separate MASTER VOLUME setting via the FX MIX pot (to the left towards DRY = volume down,
to the right towards WET = volume up).
- You can switch back and forth between the two MASTER VOLUMES via the FX footswitch. Once the
BassBase has been equipped with the MSM 1 MIDI Module, you can also activate the second MASTER
VOLUME via MIDI messages.
4.5 THE BASSBASE 600 AND MIDI
Once the MSM 1 MIDI Module has been installed, you can execute many of the switching operations of your
BassBase via MIDI. Simultaneous switching of both the BassBase 600 and the multi-effects processor offers
optimum operational simplicity.
Consult the MSM 1's instructions for detailed information on the installation procedure.
BassBase 600 MIDI operations are also described in the MSM 1 Module's operators manual.
4.6 THE ACTIVE CROSSOVER
