Hudson Super-Six 1926, Instruction Book, Page: 23 / 24

HUDSON INSTRUCTION BOOK
23
No. 3
Headlamp Adjustments -
Continued
5. Line up the lamps by placing the straight edge of a board across the
center of the lamp doors, and turning the lamps until both faces of each
door touch the edge of the board. Inspect adjustment to make sure that
the tilt has not been disturbed, then tighten stud nuts "A" securely.
When the lamps are properly adjusted and focused, as outlined above,
the light beams will appear as shown in Figure 4, and will meet the legal
requirements of most states. However, the range of tilting movement shown
at "A," Figure 2, together with the other adjustments provided, is sufficiently
great to permit any necessary deviation from this setting to conform with
your local legislation.
No. 4