OPERATING INSTRUCTIONS
This radio incorporates the new Hudson Automatic Touch Tuning. The purpose and position of each control is shown in (Fig. 1).
To Turn Radio On
Press push button on right side below ON-OFF indicator window and allow receiver to reach operating temperature.
(Approximately 20 seconds.)
Manual Tuning
1. Press the automatic tuning push button on the left side beneath automatic indicator window several times or until the letter "M"
appears in the automatic indicator window.
2. Pull manual tuning (right hand) control knob outward and turn to tune in desired stations. Tune to exact frequency for the best
tone quality.
Volume
Adjust left hand control knob for desired volume.
Tone Control
The tone control is located directly behind the volume control knob (Fig. 1). Rotating this control to the right or left will change
the tone of the receiver. The treble position is useful in overcoming wind, noise, etc. when driving, while the bass position brings
out the full mellow tones of musical programs. With the tone control set midway, the full tonal range is obtained. Turning to the
right will emphasize the high notes, while turning to left will emphasize the bass notes.
Summary of Contents for DB47
Page 6: ......
