HUDSON STEEL H-2060, Owner'S Manual

Page: 11 / 40

Step 2
1. Attach:
five 15LBS Weight Plates (#52)
five 5LBS Weight Plates (#54)
to two Guide Rods (#4 7).
As . s . e . mb.ly
nine 1 0LBS Weight Plates (#53)
one Top Plate (#55)
2. Attach one Weight Pin (#56) to one Top Plate (#55).
3. Repeat this step to complete another one.
4. Attach the Up Frame (#2) to four Guide Rods (#4 7) and the Rear Upright (#3),
using:
two M10*75 BHCS (#136) four<P11*<P20*2 Flat Washers (#143)
two M10 Nylon Lock Nuts (#144)
Note:
Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
-11-