Rev 1.2
–
6/20
3
Basic Connection Instructions
.
Network Connection
___
.
1.
Connect a live network connection, from a network with a DHCP server, to the camera.
2.
Connect the included Power Supply to the camera.
3.
Wait for camera to come to Home Position.
4.
Install the HuddleView software on your Windows PC on the same network as the camera
5.
Open the HuddleView software to connect to your camera
Note: To pull the
main RTSP
stream please use the following URL
rtsp://<camera ip>:<rtsp port>/main.h264
(example: rtsp://192.168.111.85:3750/main.h264)
Note: To pull the
sub RTSP
stream please use the following URL
rtsp://<camera ip>:<rtsp port>/sub.h264
(example: rtsp://192.168.111.85:3750/sub.h264)
Note: To pull the
low quality 3rd or 4th RTSP
stream please use the following URL
rtsp://<camera ip>:<rtsp port>/<
3
or
4
>.h264
(example: rtsp://192.168.111.85:3750/<3 or 4>.h264)
SDI Connection
.
1.
Connect an SDI cable to the SDI output on the camera.
2.
Connect the SDI cable to your equipment with an available SDI input.
USB Connection
.
1.
Connect a USB 3.0 cable to the USB output on the camera.
2.
Connect the USB 3.0 output to an available USB 3.0 port on your PC
a.
Camera will auto adjust frame rate & resolution upon connecting to a video
software
DVI Connection
.
1.
Connect a DVI cable to the DVI output of the camera.
a.
You can also connect a DVI to HDMI converter to the DVI output and run HDMI from
the camera.
2.
Connect the DVI cable to your equipment with an available DVI input.
NOTE
: The camera will auto power cycle upon connection to video software. It will auto scale the best
reolution.
Failure to follow these sequences may result in no connection.
