
29
OSCAR 330 PRO LIFT CABLE INSTALLATION INSTRUCTIONS
Your Oscar 330 Pro Saw Mill comes with a manual winch lift system. This system is spooled with a 5/32" steel
cable that is used in combination with the winch to lift and lower the saw mill cutting head. The pictures below
will help you in the event you need to re-install a cable.
Material:
• All cable is 5/32" steel cable
• 130" of cable is installed on the winch and would around the lift bale at the time of delivery
• Two 86" sections of cable are spooled around the lift bale and then run through a pulley system on
the mill head and back to an eye bolt located on the top side member of your saw mill
Note that the cable com-
ing from the winch comes
from the top of the spool
and runs over the tension-
er pulley and underneath
the lift bale and around in
a counter clockwise direc-
tion when looking from
the operator's side of the
mill
During initial installation cable
is spooled once between the lift
bale cable brackets completely
from left to right and returned
half way from right to left
The lift bale cable is
wound once in a
counter clockwise
direction around the
lift tube and toward
the inside of the
cage. It is then run
to the saw mill head
pulley. (see fig. 2)
Note: Lift bale cable on the discharge side of the mill is wound around the lift bale in the same direction (CCW)
and toward inside of the cage. Cable is run down around the pulley from the inside of the mill and up to the eye
bolt on the top side of the mill.
Summary of Contents for Oscar 330 Pro
