2012 series Tooling
(HK969)
Alcoa Fastening Systems
5
The Model 2012 series tools are lightweight,
high speed production tools designed to install:
● -04 through -06 diameter HUCK-
KLINCH® fasteners (including oversize
HUCK-KLINCH)
● -04 through -06 UNIMATIC® blind rivets
● Any other
The 2012V, with vacuum boost selector switch
ON, has two functions:
1. With tool in any position, vacuum holds
fastener firmly in nose assembly.
2. Vacuum expels broken pintail into pintail
collector.
Pulling action of the pull piston is provided by
a pneumatic-hydraulic (pneudraulic) intensifier
system powered by 90 psi air pressure. The air
inlet is equipped with a connector with 1/4-18
female pipe threads to accept your air hose or
quick connect fitting. The piston return stroke is
spring actuated.
POWER SOURCE:
90psi MAX shop air
HOSE KITS:
Use only genuine HUCK Hose Kits rated @ 10,000
psi working pressure.
HYDRAULIC FLUID:
ATF meeting DEXRON III, DEXRON IV, MERCON,
Allison C‐4 or equivalent specifications.
Fire resistant hydraulic fluid may also be used,
and is required to comply with OSHA regulation
1926.302 paragraph (d): "the fluid used in
hydraulic power tools shall be fire resistant fluid
approved under schedule 30 of the US Bureau of
Mines, Department of Interior, and shall retain its
operating characteristics at the most extreme
temperatures to which it will be exposed."
MAX OPERATING TEMP:
125°F (51.7°C)
MAX FLOW RATE:
2.9 scfm (170 l/m)
MAX INLET PRESSURE:
90 psi (6.2 bar)
MIN PULL CAPACITY:
2670 lbs (11.88 kN) @ 90 psi
MIN STROKE:
.650 inches (1.65 cm)
SPEED/CYCLES:
20 per minute
WEIGHT:
2012:
4.4 lbs (1.99 kg)
2012B & 2012V:
4.7 lbs (2.13 kg)
D
D
ESCRIPTION
ESCRIPTION
S
S
PECIFICATIONS
PECIFICATIONS