![Hubner Cobolt DPSS Owner'S Manual Download Page 14](http://html1.mh-extra.com/html/hubner/cobolt-dpss/cobolt-dpss_owners-manual_2180890014.webp)
14 | 36
OWNERS MANUAL | Cobolt Modulated DPSS Lasers | D0342-C JUNE 2016
System Description
The information presented here is believed to be accurate and is subject to change without notice. The specifications
contained herein cannot be guaranteed outside of normal operational conditions. The output power can be adjusted
using control commands, see Section 7.4. Specifications are guaranteed at 100% of nominal power.
Specification
Optical Specifications
Centre wavelength (nm)
1
Output power (mW)
Twist™
457.0 ± 0.3
25, 40
Blues™
473.0 ± 0.3
25, 40
Calypso™
491.5 ± 0.3
25, 50, 80
Fandango™
514.4 ± 0.3
25, 50, 100, 120
Samba™
532.1 ± 0.3
25, 50, 100, 150, 240, 320
Jive™
561.2 ± 0.3
25, 50, 100, 120, 160
Mambo™
593.6 ± 0.3
25, 50, 80
Flamenco™
659.6 ± 0.3
80
1.
The wavelength is fixed with this accuracy, while drift is defined as Wavelength stability. The wavelength is specified in air.
2.
The exit window is located optically ~20cm before the laser head shutter.
3.
Predominantly due stray light, fiber coupling will further improve the extinction ratio.
Product Wavelength
457
473
491
514
532
561
594
660
Rise/Fall time
< 200ns
Modulation Frequency (analogue and digital)
DC-3MHz
Extinction Ratio (free space)
3
> 30 dB (DC)
Beam diameter at Aperture (1/e
2
)
700 ± 50 µm
Beam divergence (mrad, full angle, 1/e
2
)
< 1.2
< 1.3
< 1.5
Noise 20 Hz – 20 MHz (pk-pk)
< 2 %
< 3 %
< 2 %
< 3%
< 1 %
Noise 20 Hz – 20 MHz (rms)
< 0.25 %
< 0.3 %
< 0.25 %
< 0.3%
< 0.1%
Long-term power stability (8 hours)
< 2 %
< 3 %
< 2 %
< 3 %
< 2 %
Spatial mode
TEM
00
, M
2
<1.1
Spectral linewidth
< 1 MHz
Wavelength stability (after warm-up)
2 pm over ± 2 ºC and 8 hrs
Beam symmetry at aperture
> 0.95 : 1
Beam pointing stability (after warm-up)
< 20 µrad/
º
C (over 10-40
º
C)
Coherence length
> 100 m
Beam waist location (from exit window)
2
20 cm
Beam angle accuracy
< 5 mrad
Beam position accuracy
< 0.25 mm
Polarization ratio (linear, vertical)
> 100:1
Residual IR emission
< Class 1