Hubner Cobolt 04-01 Series, Owner'S Manual

Page: 18 / 32

18 | 32
OWNERS MANUAL | Cobolt 04-01 Series | D0105-I October 2022
Optical Specifications Fiber Pigtailed Laser head version 04-03 and 04-53
Product Wavelength 457 473 514 532 561 594 660 1064
Maximum Power out of Fiber (mW)
25
25
35
25
50
100
25
50
100
150*
200*
25
50
75
100*
25
50
75
50* 200*
Fiber end-cap Yes No Yes No
Power stability (8 hrs ± 3°C)
< 3 %
Mode Field Diameter (µm)*
3.5 4.0 4.5 6.6
Fiber Output FC/APC, 8°, non-collimated
Fiber Type SM/PM
Polarization PER > 100:1, ± 2°
Standard Fiber Length 1 m
Jacketing Ø 3mm, Stainless Steel
Available configuration OEM or CE/CDRH
* Wavelength and power level only available as model 04-53.
** MFD is measured at the nominal wavelength for the fiber (400 nm, 480 nm, 630 nm and 980 nm respectively). The tolerance on the MFD is ± 0.5 µm
Operation and Environmental Specifications
Power supply 12 VDC, 5 A (11-28 VDC accepted)
System power consumption (Laser Head + Controller) <25 W (typical ~15 W) , < 35 W (typical ~25 W) *
Maximum heat dissipation of Laser Head <15 W (typical ~10 W), < 25 W (typical ~15 W) *
Maximum Laser Head baseplate temperature 50
º
C
Warm-up time, from OFF <2 min
Ambient temperature, operation 10 - 40
º
C
Ambient temperature, storage -10 -> +60
º
C
Humidity 0-90% RH non-condensing
Ambient Air pressure 950-1050 mbar
Heat sink thermal resistance, Laser Head <0.6 K/W
<0.4 K/W *
* Applies to high power models: Samba 300 mW, Samba 400mW, Jive 200 mW, Mambo 100mW, Flamenco 100 mW, Rumba 400 mW
Electrical Interfaces
Interfaces Connector Function
Input power Kycon KPJX-45, 4-pin Power supply to Controller
Laser Head to Controller HD-sub 26-pin, male Connection to Laser Head
Controller to Laser Head HD-sub 26-pin, female Connection to Controller
Data port USB-type mini B Control and monitoring via control commands
Remote interlock & Molex 90130-3206 Analog input 5 – 12 V => Laser ON