Hublot BigBang, Instruction Manual

Page: 9 / 11

17 16
INSTRUCTIONS FOR ADJUSTMENT
1. Before making any adjustments, turn the crown clockwise (position 0). After turning the
crown approx.30 times, the watch will be able to run automatically thanks to the movements
of your wrist.
2. Pull the crown into position 1, then turn the hands clockwise until the date changes. The
watch shows midnight. Continue and position the hands to 3 o'clock (3 am).
3. Press the adjuster A positioned at 2 o'clock several times until the full moon appears in the
centre of the opening (at 6 o'clock). To adjust this function correctly, use the lunar calendar at
the back of the instruction manual to calculate the number of days since the last full moon.
Next, press the adjuster the same number of times as the number of days since the last full
moon.
4. Press the adjuster C at 8 o'clock several times until the date is positioned at 1.
5. Press the adjuster D at 9 o'clock several times until the required month is shown and the year
is displayed inside the red zone on the dial (the leap year is indicated by the red number 4).
6. Press the adjuster C at 8 o'clock several times until the desired date is shown.
7. Press the adjuster B at 4 o'clock several times until the desired day is shown.
8. Turn the hands clockwise until the desired hour is shown (position 1). Then press the crown
to return it to position 0, the movement begins to function. Tighten the crown.
E
N
G
LI
SH
PRECAUTIONS OF USE
• Do not attempt to tighten the crown when it is in the time-setting position; it must be returned
to the winding position before being tightened.
• To guarantee that the watch runs constantly and regularly, you are recommended to stop the
timer (using the push-piece at 2 o'clock) when the watch is not being worn or if the timer
function is not being used.
• Do not make any adjustments between 8 pm and 1 am, or you will damage the
mechanism.