Huberg EX-PEX PLUS, User Manual

Page: 13 / 21

Form creation date: 01.04.2008 - SpKa
Document creation date: 03.10.2019- RC
13/21
4 BATTERY CHARGE
To charge batteries, switch off the instrument and insert it in the charger support (see fig. 3). A LED
will indicate battery charge state.
Led flashes once per second: it means that it is charging batteries in fast-charge mode.
Led flashes twice per second: it means that it is charging in maintaining/trickle charge mode.
Maintaining-charging is never stopped and it permits to have full charged batteries in order to have
always the maximum device autonomy in operational situation.
Fig. 3
When the docking support is connected to the net, the led blinks two times quickly.
IMPORTANT: batteries has to be charged in safe places and without gas.
IMPORTANT: in case of unused device for long time, the device may not power on because of battery
inactivity. could. If this happens, charge the device for at least 16 hours.