16
Body-worn Operation
This device was tested for typical body-worn operations. To comply
with RF exposure requirements, a minimum separation distance
of 10mm must be maintained between the user’s body and the
handset, including the antenna. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS
standard(s)
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth
for an uncontrolled
environment. End user must follow the specific operating instructions
for satisfying RF
exposure compliance. This transmitter must not be co-located or
operating in conjunction with
any other antenna or transmitter.
These requirements set a SAR limit of 1.6 W/kg averaged over one
gram of tissue.
The highest SAR value for this model phone when tested for use at
the ear is 0.120W/Kg and when worn on the body is 0.454W/Kg. The
maximum scaled SAR in hotspot mode is 0.454W/Kg This device
was tested for typical body-worn operations. To comply with RF
exposurerequirements, a minimum separation distance of 10mm must
be maintained between the user’s body and the handset, including
the antenna. Third-party belt-clips, holsters, and similar accessories
used by this device should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use
only the supplied or an approved antenna.
