INSTALLATION INSTRUCTIONS - TRUNNION SHEET 2 OF 2
SAVE THESE INSTRUCTIONS
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
www.hubbelloutdoor.com
NOTES:
Contact Hubbell Lighting for any replacement parts.
Contact your local distributor or agent to confirm parts availability prior to ordering replacement parts.
Electrical Connections
RISK OF SHOCK
POWER MUST BE OFF
Trunnion Installation
If mounting hardware is present, remove from luminaire fixture.
Remove the trunnion cover from the housing by loosening the three screws on the cover.
Route black, white, and green wire leads from luminaire through the open trunnion housing. (See Fig. 1)
Loosely attach trunnion housing to luminaire with provided fastener.
(Be careful not to pinch any wires during attachment.)
Set the luminaire to the desired mounting angle by rotating the trunnion housing.
Tighten the provided fastener to lock the luminaire at the desired angle.
Splice the branch circuit power leads to the fixture power leads, black to black (hot), white to white (neutral), and green to
green (ground). SO Cord size 16/3. (Fig. 1)
Replace the trunnion cover to the trunnion housing and tighten screws. (Fig. 2)
(Be careful not to pinch any wires.)
•
•
1.
2.
3.
4.
5.
6.
7.
8.
Trunnion Cover
Cord Entry -
Supplied with Bushing
(16/3 Cord)
Ground
Screw
Trunnion
Housing
Fastener
Luminaire
(Step #3)
(Step #7)
Fig. 1
Fig. 2
Splice Area
(Circuit power leads
to Fixture leads)