Page 2
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
LIGHTVAULT
®
- LTV Lens Reflector LTV57/58 & LTV757/758
Installation Instructions
7. Install lamp of type and wattage shown on fixture
label.
8. Note: After installing lamp, let fixture warm up for
5 minutes before completely closing. Install
eyeball-lens frame, lens and gasket making sure
surface is clean and dry.
1
2
3
4
Coat screws with silicone grease and tighten
opposing screws progressively and evenly until tight.
Any foreign object trapped in gasket will create
potential points of entry for ground water.
5. Install eyeball assembly onto
housing (making sure eyeball will
be facing desired position), and
tighten opposing screws
progressively and evenly until
tight.
Note: Eyeball will mount in 8
directions @ 45° increments.
6. Remove eyeball frame, lens and
gasket.
LENS FRAME / REFLECTOR INSTALLATION INSTRUCTIONS cont'd.
4. Grease threads before installing
eyeball onto housing.
Note: Make sure gasket and gasket
surface is clean and dry. Make
certain no dirt has fallen into screw
holes. Any foreign objects trapped
in the gasket areas will create
potential points of entry for ground
water.
