Hubbell HBLGW04000EUS1, User Manual, Page: 61 / 62

Hubbell Ethernet Gateway V4
User’s Manual
PD2864 9/18 Page 60
Regulatory Information and Labels
Regulatory Information
This product has been certified to meet the following requirements: UL / ANSI standards 61010-
1,Second Edition, Dated July 12, 2004 with revisions through and including October 28,2008
CAN/CSA-C22.2 No. 61010-1, second edition, including Amendment 1, or a later version of the same
standard incorporating the same level of testing requirements. Council Directive 2006/95/EC
(December 12, 2006) on Low Voltage Equipment Safety; IEC 61010-1:2001 (Second Edition) and EN
61010-1:2001 (Second Edition) Council Directive 1999/05/EC - European Union (EU) Radio &
Telecommunications Terminal Equipment Directive(R&TTE) ETSI EN 300 220-2, Issued:2006/04/01
and ETSI EN 301 489-3, Issued:2002/08/01 V1.4.1 Council Directive 2004/108/EC (December 15,
2004) on Electromagnetic Compatibility CENELEC EN 61326-1 Issued:2006/05/01; IEC 61326-
1:2005;:1997
– AS/NZS 4268: 2008
Class B Device Statement / FCC Regulations
Section 15.105(a) of the FCC Rules: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Section 15.19 of the FCC Rules: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this product not expressly
approved by Hubbell LLC might cause harmful interference and void the FCC authorization to operate
this product.
Pursuant to part 2.1091c of the FCC rules device is categorically excluded from routine RF Exposure
regulations.
Industry Canada (IC) Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the
device.Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser)gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.Per section RSS-102, 2.5 of Industry Canada regulations, this device is categorically
excluded from Routine Evaluation Limits.
Industrie Canada (IC) Déclaration de conformité
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit