Hubbell Geyser-R, Installation Manual

Page: 15 / 29

15 Version 2.9

Place the Geyser-R in the final location.

The Geyser-R should be placed as close as possible to the water heater to minimize heat
loss through the piping.

Optional: If desired, at this time add a shut-off valve to each line (this is an alternative
installation, that may reduce the unit efficiency slightly)

Cut your ¾” PEX to length.

Slip a ¾” Pex crimp onto hose.

Push PEX onto the PEX end of the ¾” PEX barb that is connected to the “T” on the
assembly at the drain valve of the water heater. Repeat for both inlet and outlet hoses.

Crimp the PEX onto the PEX barb at both “T’s” to secure the PEX lines.